Ultrafine grinding mill
and Raymond mill
are two commonly used equipments for grinding stone powder
in the mining industry
. The two devices belong to vertical mills
, and the difference is not very big in appearance. So what's the difference between these two mills? How to choose? Let's analyze it together.
1. The composition and structure of Ultrafine grinding mill and Raymond mill are different
The difference in the composition and structure of the Ultrafine grinding mill and the Raymond mill is mainly reflected in the design of the grinding roller
The number of grinding rollers of Raymond Mill is divided into 3 rollers
, 4 rollers
, 5 rollers
and 6 rollers
. The spring plum blossom frame assembly is adopted. The grinding roller revolves around the central axis and rotates on its own at the same time, and the material is fed into the grinding roller by the shovel blade. Between the grinding roller and the grinding ring, the material is crushed by rolling between the grinding roller and the grinding ring.
Ultrafine Grinding Mill
The number of grinding rollers in the Ultrafine grinding mill can be as high as 36
, which revolve around the main machine. Under the action of the high-pressure spring and centrifugal force, the grinding rollers swing outward horizontally and are tightly pressed on the grinding ring. The material is ground due to the rolling of the grinding rollers. purpose of powder.
Because of the participation of the high-pressure spring
, under the action of the same power, the roller pressure of the Ultrafine grinding mill is twice
that of the Raymond mill.
2. The applicable materials of Ultrafine grinding mill and Raymond mill are differentRaymond Mill
Raymond mill is mainly used in building materials, mining and metallurgy industries. The grinding fineness is between 80-400 mesh
. Through technical improvement, the grinding fineness can reach 600 mesh
. It is suitable for grinding materials with Mohs hardness below grade 7
. , Humidity can not exceed 6%
, such as limestone, talc, marble, kaolin, fluorite, etc.Ultrafine Grinding Mill
The hardness of the materials that can be ground by the Ultrafine grinding mill is higher than that of the Raymond mill. The hardness of the materials that can be ground can reach 9.2
on the Mohs scale, such as limestone, marble, dolomite, etc. It can grind 30-100 mesh
coarse powder, and can also grind Grind fine powder around 325-2500 mesh
3. The production capacity of Ultrafine grinding mill and Raymond mill is differentRaymond Roller Mill
Raymond is ground into fine powder, and the sieving rate can reach 99%. The three-dimensional structure reduces the floor space. Raymond mills have different numbers of rollers and different feeding particle sizes, which are below 15-30mm
, respectively, and the production capacity is 1-90 tons per shift
The number of grinding rings of different Ultrafine grinding mills is different. There are 3 rings and 4 rings
. The feed particle size is below 20mm
, and it can process 0.5-15 tons
of materials per hour. The production volume is slightly larger than that of Raymond mills.
4. How to choose Ultrafine grinding mill and Raymond mill？
Through the comparison of the above three aspects, we can see that although the appearance of the Ultrafine grinding mill and the Raymond mill are not very different, their internal structure and material handling capacity are very different, so we should choose the equipment according to our own materials. Select the appropriate equipment for the situation.
For example, the hardness of the grinding material is relatively large, and the Ultrafine grinding mill should be selected if the hardness exceeds 7.2; the fineness of the grinding material is relatively fine, and the Ultrafine grinding mill should be selected if the grinding material exceeds 600 mesh; the processing capacity is relatively large, the Ultrafine grinding mill should be selected.
If the material is more suitable and there is no special requirement for the fineness of production, then we need to compare the prices of the two and choose the one with higher cost performance.
Who we are?
Shanghai CLIRIK Machinery Co.,Ltd. has been committed to the field of ultra-fine powder grinding machines for 20 years.
CLIRIK has a first-class manufacturing base with standardized and intelligent production lines.
CLIRIK's professional R&D, sales, installation and after-sales teams have provided door-to-door services to more than 100 countries and regions.
Which models can be selected for processing ultra-fine Barite powder?
HGM grinding mill: 74-5 micron(200-2500 mesh); D97=5 micron
YGM Raymond mill: 613-33 micron(30-325 mesh); D90=30 micron
CLUM vertical roller mill: 20-5 micron(600-3000 mesh); D50=2 micron D97=4 micron
How to get the latest quotation?
You can leave a message online or contact CLIRIK directly:
Email: [email protected]