Home > NEWS > Industry News >

Misunderstanding of Lubricating Oil Used in Raymond Mill

Source: clirik   By Administrator   Posted: 2016-11-07   

As a common grinding plant, Raymond Mill can be used in fine powder making of barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement and phosphate rock, and other Non-flammable and explosive minerals, chemicals, construction materials with Mohs hardness less than 9.3 and humidity less than 6%.

 

Raymond mill after a period of service time, should be overhauled, incluidng repair and replacement of wearing parts, bolt and nut inspection, whether there is loosening, whether to increase lubricating grease. In opearation of Raymond Mill, the use of lubricants is very necessary and essential. Regular lubrication to the important or wear parts is one of the daily maintenance works of Raymond Mill. If you do not add lubricant or oil for a long time, or choose lubricating oil with wrong number, it will cause bearing wear.

 

Raymond mill

 

Today to share with you some of the errors in Lubricating Oil Used in Raymond Mill

 

1.the more oil the better, right?
In fact it is not. If you add too much oil, will not only reduce the original cleaning and anti-wear function of lubricating oil, but also increase the greasy and carbon deposition, affecting performance and service life of Raymond Mill. So just add enough lubricating oil.

 

2.be careful when chooing Lubricating Oil.
first, we requires lubricants have good stability and oxidation resistance. Second, Lubricants should have good anti-rust, anti-corrosion, anti-emulsifying properties. Third, Lubricants have better flame resistance.

 

If you need Raymond mill, please contact with us. We will supply you with good quality product and service.