CLIRIK Environment-Friendly Grinding Machine Technical Renovation Completed & Officially Put Into Pr
Source:clirikb
Posted:2026-07-13
CLIRIK's long-planned environment-friendly grinding machine technical transformation project completes full equipment debugging and goes into formal mass production in mid-July 2026.
Focusing on global increasingly strict environmental supervision, our R&D team spends nearly 8 months completing structural optimization and dust removal system upgrade of green powder mill.
The upgraded low-energy mineral equipment effectively cuts power consumption and workshop dust emission simultaneously.Many domestic and overseas green mineral manufacturers pay close attention to the new generation environment-friendly grinding machine after transformation success.
Multiple pre-intent orders from Europe and Southeast Asia are received during the trial operation period of upgraded equipment.
Upgraded environment-friendly CLIRIK grinding machine after technical renovation
The core transformation focuses on three major modules: internal grinding cavity structure, full-set dust collecting system and intelligent frequency conversion control.
Original HGM series equipment provides mature mechanical foundation for whole green upgrading work.
The optimized inner cavity reduces over-grinding phenomenon and lowers extra power waste caused by invalid material crushing.
Renewed closed-loop pulse dust removal system further reduces exhaust dust concentration far below international limit value.
Intelligent frequency converter automatically adjusts motor output according to real-time feeding volume to realize idle power saving.
Detailed parameter changes after environment-friendly grinding machine upgrade are sorted into official product manual.
Under identical raw material and fineness requirements, unit power consumption drops by over 29% compared with old versions.
Workshop dust emission is well controlled to satisfy EU environmental access standards.
All upgraded green powder mill still keeps adjustable fineness range from 150 mesh up to 2500 mesh flexibly.
Four mainstream HGM specifications (HGM80/HGM100L/HGM125L/HGM1680L) all finish full green transformation.
Full equipment parameter sheet records all upgraded technical indicators in detail.
1\ Remarkable energy-saving benefit reduces long-term electricity expenditure for processing enterprises greatly.
2\ Ultra-low dust emission helps factories smoothly pass local environmental assessment globally.
3\ Optimized wearing part structure prolong service cycle and reduce frequent accessory replacement cost.
4\ Intelligent automatic control cuts manual operation threshold and lowers artificial error rate.
5\ Wide raw material adaptability fits limestone, talc, barite, calcium carbonate multiple mineral processing.
After trial run for one month at domestic cooperative mineral factory, all operating indicators reach pre-designed standard.
A German coating raw material manufacturer places pre-order after obtaining trial operation data report.
CLIRIK opens global pre-sale channel for upgraded green powder mill with priority delivery for pre-order clients.
Our technical team can provide targeted customized green transformation plan for customers’ existing old grinding equipment.
European high-end pharmaceutical powder factories prefer our low-pollution environment-friendly grinding machine.
Domestic desulfurization limestone processing plants replace outdated equipment with upgraded CLIRIK mineral equipment in batches.
The completion of environment-friendly grinding machine technical transformation marks CLIRIK's breakthrough in green mineral equipment field.
Low consumption and ultra-low emission green powder mill caters to global sustainable development trend of mineral industry.
CLIRIK will continue investing in green technology R&D to upgrade existing equipment iteratively in future.
Original HGM series equipment provides mature mechanical foundation for whole green upgrading work.
The optimized inner cavity reduces over-grinding phenomenon and lowers extra power waste caused by invalid material crushing.
Renewed closed-loop pulse dust removal system further reduces exhaust dust concentration far below international limit value.
Intelligent frequency converter automatically adjusts motor output according to real-time feeding volume to realize idle power saving.
Detailed parameter changes after environment-friendly grinding machine upgrade are sorted into official product manual.
Under identical raw material and fineness requirements, unit power consumption drops by over 29% compared with old versions.
Workshop dust emission is well controlled to satisfy EU environmental access standards.
All upgraded green powder mill still keeps adjustable fineness range from 150 mesh up to 2500 mesh flexibly.
Four mainstream HGM specifications (HGM80/HGM100L/HGM125L/HGM1680L) all finish full green transformation.
Full equipment parameter sheet records all upgraded technical indicators in detail.
| Model | Max Feed Size(mm) | Finished Mesh Range | Main Power(KW) | Hour Capacity(t/h) |
| HGM80 | ≤20 | 200~2500 | 75 | 0.5-5.5 |
| HGM100L | ≤20 | 200~132-150 | 132-150 | 1.2-10 |
| HGM125L | ≤20 | 150~2000 | 185-200 | 2.5-20 |
| HGM1680 | ≤20 | 150~1500 | 250-280 | 5-45 |
Five prominent upgraded advantages of CLIRIK environment-friendly grinding machine
1\ Remarkable energy-saving benefit reduces long-term electricity expenditure for processing enterprises greatly.2\ Ultra-low dust emission helps factories smoothly pass local environmental assessment globally.
3\ Optimized wearing part structure prolong service cycle and reduce frequent accessory replacement cost.
4\ Intelligent automatic control cuts manual operation threshold and lowers artificial error rate.
5\ Wide raw material adaptability fits limestone, talc, barite, calcium carbonate multiple mineral processing.
| Feature | Benefit |
| Remarkable energy-saving benefit | Reduces long-term electricity expenditure for processing enterprises greatly |
| Ultra-low dust emission | Helps factories smoothly pass local environmental assessment globally |
| Optimized wearing part structure | Prolongs service cycle and reduces frequent accessory replacement cost |
| Intelligent automatic control | Cuts manual operation threshold and lowers artificial error rate |
| Wide raw material adaptability | Fits limestone, talc, barite, calcium carbonate multiple mineral processing |
After trial run for one month at domestic cooperative mineral factory, all operating indicators reach pre-designed standard.
A German coating raw material manufacturer places pre-order after obtaining trial operation data report.
CLIRIK opens global pre-sale channel for upgraded green powder mill with priority delivery for pre-order clients.
Our technical team can provide targeted customized green transformation plan for customers’ existing old grinding equipment.
Application fields of upgraded environment-friendly grinding machine
Green powder mill is widely applied in construction filler, chemical raw material, pharmaceutical auxiliary powder production.European high-end pharmaceutical powder factories prefer our low-pollution environment-friendly grinding machine.
Domestic desulfurization limestone processing plants replace outdated equipment with upgraded CLIRIK mineral equipment in batches.
CLIRIK green low-consumption grinding machine
Frequent Asked Questions
Q1: What kinds of minerals can upgraded environment-friendly grinding machine process?
A1: Limestone, calcite, talc, barite, calcium carbonate and other common non-metallic raw ores with moisture below 6%.Q2: How much power can new green powder mill save compared with old models?
A2: Average power consumption reduces by around 29% under equal production conditions.Q3: Can CLIRIK upgrade customers’ existing old grinding machines?
A3: Yes, we supply personalized green technical renovation solution for users’ in-service equipment.Q4: Does upgraded equipment meet EU environmental import standard?
A4: Dust index complies with EU industrial emission rules and supports smooth customs clearance into Europe.Q5: What is delivery cycle of pre-order green grinding machine?
A5: Standard pre-order:20~30 working days; special customized:35~50 working days.The completion of environment-friendly grinding machine technical transformation marks CLIRIK's breakthrough in green mineral equipment field.
Low consumption and ultra-low emission green powder mill caters to global sustainable development trend of mineral industry.
CLIRIK will continue investing in green technology R&D to upgrade existing equipment iteratively in future.
Related Newsmore >>
- CLIRIK Environment-Friendly Grinding Machine Technical Renovation Completed & Officially Put Into Pr2026-07-13
- CLIRIK Receives Large Delegation from Vietnam for Factory Audit & Bulk Grinding Mill Contract Signin2026-07-06
- Brief Introduction to CLIRIK Grinding Wear Parts & Grinding Spare Parts2026-06-30
- CLIRIK Large Batch HGM Grinding Mill Shipped to South Africa Full-Set Mineral Processing Projects2026-06-30
- Facts About Mica Grinding Machine: Particular to Dry Mica Powder Making2026-06-23
- CLIRIK New Product Launch: Upgraded CLUM Vertical Grinding Mill Officially Released in Q2 20262026-06-22
