Group News

Focus on the field of micro powder grinding !

CLIRIK Concludes CHINACOAT 2026 and Welcomes Your Visit to Factory

Source:clirikb Posted:2026-11-16
CLIRIK closes its exhibition schedule at CHINACOAT & SFCHINA 2026 at the Canton Fair Complex in Guangzhou.
The 30th anniversary edition of this dual show runs through its three-day programme.
Our sales team and technical engineers receive visitors at Booth 3.1 A43 during the whole event.
Many coating producers, mineral filler processors and surface finishing professionals stop by the booth.
We thank every new and old customer for the visit. We also thank all partners who forward our exhibition news to their colleagues.

The show ends. Our work with you does not end.



Coating producers care about filler quality more than ever this year.Powder fineness consistency decides coating gloss and film flatness.
Powder surface activity decides how well the filler binds with resin.Dust control and energy cost decide whether a filler line stays profitable.
Visitors bring these questions to our booth one after another. Our engineers answer them with running project data.
Many talks start from one machine model and end at a complete production line layout.



The HGM ultrafine grinding mill handles calcite, talc, kaolin, barite, dolomite and wollastonite.
Finished powder fineness adjusts from 150 mesh to 3000 mesh.
Operators change the classifier speed on the PLC touch screen.
They do not stop the mill and do not open the machine housing.
A plant switching between several coating formulas keeps the line running all day.
This feature draws strong interest from visitors who run multi-specification orders.



The grinding and modification integrated unit works on one working principle.
The unit grinds mineral powder and coats the particle surface in the same dry process.
The finished activated powder mixes easily with resin and solvent systems. Coating plants use it to replace two separate working steps.
Fewer steps mean lower power cost and less material handling.
Several visitors ask for trial tests on their own talc and calcium carbonate samples.



The closed negative-pressure grinding system answers the dust question. The whole line runs under negative pressure.
Airborne powder stays inside the pipeline and the pulse collector. Workshop dust stays low.
The design meets strict environmental rules in most export markets.
Our figures from running plants show 20 to 30 percent lower power use than traditional grinding setups.
Visitors from markets with strict emission checks pay close attention to this point.

Booth talk has one clear limit. A booth shows samples, drawings and short videos.
A booth cannot show how a machine is built, neither can show how a machine runs under load.
Only the factory can show these things.
That is why we invite every visitor to continue the talk at our works.

 

Why a CLIRIK Factory Visit Beats a Booth Talk?




A factory visit lets you see the machine before you pay for the machine.
You walk through the assembly workshop.
You watch the main unit, the classifier and the control cabinet being assembled.
You check weld quality, machining accuracy and part fit with your own eyes.
You compare the finished unit with the drawing you received at the booth.
Nothing hides behind a display wall.

 

A factory visit lets you test your own material.

You bring raw ore samples or ship them ahead of your trip.
Our lab runs the grinding test on your material.
We record hourly output, powder fineness distribution and machine load. We hand you a written test report.
A laser diffraction particle size report shows the true D50 and D97 figures.

You judge the machine by your own ore, not by a sample bag we prepared.
A factory visit lets you meet the engineers who will serve your project.
At a booth you meet sales staff most of the time.
At the factory you sit with mechanical engineers and process engineers.

Put your site conditions on the table. And you may also talk about power supply, workshop height, raw material moisture and target output.
Our engineers draw a line layout on paper in front of you. You leave with a scheme you can take to your own management team.


A factory visit lets you settle commercial details face to face.
Check the delivery schedule against your building progress.
Rview the packing method for sea transport.
You can confirm the spare parts list and the warranty terms. Asking how online installation guidance works.
Clear answers at the factory remove the doubts that a price sheet cannot remove.

A factory visit also lets you judge our service depth.
You see the spare parts warehouse. You see the test bench.
You see how we record machine data before shipment.
To meet the after-sales team handles overseas sites.
Service capacity is hard to describe in words. It is easy to see in a workshop.

Five Practical Gains From a CLIRIK Factory Visit

Five practical gains come out of a CLIRIK factory visit.
First, you check real manufacturing quality instead of pictures.
Second, you get grinding test data from your own mineral sample.
Third, you receive a targeted production line layout for your site.
Fourth, you confirm delivery, installation and spare part terms in person.
Fifth, you see the automation functions working on a real machine.

Summary of Key Features and Benefits

Feature Benefit
Workshop inspection of the assembly line Judge real workmanship and part quality before ordering
Grinding test with customer mineral sample Get true output and fineness data for your own ore
Face-to-face engineering discussion Receive a site-specific production line layout
Live PLC and classifier demonstration Understand low-labor operation and fast fineness switching
Clear service confirmation Lock delivery, installation and spare part support in advance
 
 
<img alt="CLIRIK team discusses coating filler production line layout with visiting customers">

We keep the factory visit channel open all year. You send us your mineral type, target mesh and expected hourly output.
Our sales team confirms a visiting date that fits your travel plan.
We prepare machine drawings, parameter sheets and past project cases before you arrive.
We arrange the workshop tour, the sample test and the technical meeting in one day.
Overseas visitors get English-speaking reception from our international team. Airport pickup near Shanghai can be arranged on request.

 

Application Fields of CLIRIK Grinding Solutions

CLIRIK grinding equipment serves coating filler production first.
Ground calcium carbonate powder fills architectural coatings and industrial coatings.
Talc powder improves film smoothness and anti-sag property. Kaolin supports matt surface finishes.
Barite powder adds weight and brightness in special formulas. Wollastonite improves film toughness and crack resistance.

The same equipment serves plastic filler production.
Modified calcium carbonate powder reduces resin use in pipe, sheet and profile lines.
Talc powder improves dimensional stability in automotive plastic parts.
The same powder also serves rubber filler, paper coating, sealant and adhesive production.
One grinding line often supports several downstream product families.
That is why plants ask for flexible fineness control and fast specification switching.



Plants in South Asia, Southeast Asia, the Middle East, Africa and South America run our lines today.
These markets share one common need. They want stable output with a small operating crew.
They also want clean workshops that pass local environmental checks. Our standard configuration answers both needs.

Our engineers adjust the configuration to local power supply, raw material and climate conditions.
We send warm wishes to all our customers and partners as this exhibition season closes.

We wish your plants steady output through the winter production period.May your projects bring good returns and long partnerships.
The show floor is packed up. The machines on our booth go back to the workshop.

The questions you raised stay with our team. Send us a message when your project moves forward.
We will answer with drawings, data and a clear plan. We look forward to seeing you at our factory.

 

FAQ

Q1: What did CLIRIK display at CHINACOAT & SFCHINA 2026?

A1: We displayed the HGM ultrafine grinding mill series, the grinding and surface modification integrated unit, and the closed negative-pressure grinding system with pulse dust collection.

Q2: Where was the CLIRIK booth located?

A2: Our booth was 3.1 A43 at the Canton Fair Complex in Guangzhou, during the three-day 30th anniversary edition of CHINACOAT and SFCHINA.

Q3: Can I still discuss my project after the exhibition closes?

A3: Yes. Our sales team and engineers keep working after the show. Send your material type, target mesh and capacity demand, and we reply with a suitable machine model and a preliminary layout.

Q4: Why should I visit the factory instead of only reading a catalogue?

A4: The factory shows real workmanship, real test data and real service capacity. You see the assembly line, watch a grinding test and meet the engineers who handle your project.

Q5: Can I bring my own mineral sample for a grinding test?

A5: Yes. You can carry samples with you or ship them ahead of your visit. We run the test on your material and provide a written report with output and particle size figures.

Q6: Is the grinding test charged?

A6: Sample testing is free for visiting customers. We cover the standard test and the report.

Q7: How long does a full factory visit take?

A7: A complete visit covers the workshop tour, the sample test and the technical meeting. Plan one full working day for this programme.

Q8: What should I prepare before the visit?

A8: Prepare your raw material details, target fineness, expected hourly output, site power supply and workshop space. Photos of your site help our engineers a lot.

Q9: Can we discuss an upgrade of our existing grinding line?

A9: Yes. Our engineers review your current equipment and give retrofitting suggestions on site. We also quote the cost of a partial or full replacement.

Q10: Do you provide English reception for overseas visitors?

A10: Yes. Our international sales team receives overseas customers in English and helps with the visit schedule.

Our HGM series and the integrated modification line answer this demand with proven field data. A factory visit turns the talk into a decision.
We keep our workshop, our test lab and our engineers open to every customer, new or old.
Send a message when you plan your trip, and we will prepare everything before you arrive.

 
Advisory
Get Quote
WeChat