Stone Crushing Machine

Focus on the field of micro powder grinding !

PC Hammer Crusher

Capacity: 5-30t/h

Max feeding size: <350mm

Processing ability: 5-30t/h

Range of application: Almost all minerals, such as quartz, feldspar, mica, calcite, gypsum, fluorite, limestone, soil, clay, marble, granite, pebble, coal, slag, iron ore, copper ore, manganeseore, refractory material, glass, etc.

Overview

Brief Introduction of PC Hammer Crusher:

PC Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds.

 

PC Hammer Crusher

 

Working Principle of PC Hammer Crusher:

PC Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors.

 

Working Principle of PC Hammer Crusher

Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.

 

Benefit

1.high capacity, high crushing ratio

2.uniform particle size, simple structure

3.Low investment, easy management and maintenance.

Specifications

Model PC400x300 PC600x400 PC800x600
Rotor diameter /mm 400 600 800
Rotor length /mm 300 400 600
Rotor speed r/min 1100 1000 900
Max. feeding size /mm <100 <220 <350
Ouput size /mm 5-10 5-15 5-20
Capacity  T/h 5-13 10-20 18-30
Motor power /KW 11 18.5 45
Number of hammer /piece 16 20 28
Weight  /T 0.8 1.8 2.8
Overall dimension  L*W*H/mm 900*670*860 1200*1050*1200 2360*1490*1415
 

Note: This specification is just referencing, any changes are subject to the products.

 

Send us an Inquiry

If you have some questions about our products, please feel free to fill out the form below, and we will contact you within 24 hours.

Advisory
Get Quote
WeChat