VSI-5X Impact Crusher
|Raw materials:||iron ore,nonferrous metals, corundum, and bauxite, quartz sand, and basalt, etc.|
|Max feeding size:||50mm|
|Application:||cement making, refractory making,glass raw materials making, sand making, and metallurgical industry, etc.|
|Shipping ports:||Shanghai, China|
|Delivery:||15 days after received the deposit|
Brief Introduction of VSI-5X impact crusher:
VSI-5X impact crusher is the Clirik’s latest generation of vertical shaft impact crusher, which introducing Germany technology and owning a number of patents and independent intellectual property rights. VSI-5X crusher has become the core product in sand making industry, which integrating three types of crushers.
Working Principle of VSI-5X impact crusher:
Materials fall into the hopper and then through the feed opening at center enter the high speed rotor which will throw out the materials with high speed. Firstly, materials strike those materials that are free falling down. Then, materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity and then fall down. After that, the falling materials with materials shot from the impeller form a continuous materials curtain. Lastly, crushed materials will be charged from the discharging opening.
The materials fall into the hopper and circle-hole, and then they will be divided into two parts by the distributing plate. One part of materials cross the distributing plate and enter the high speed impeller,and then materials are accelerated and thrown out. The other part falls down from the sides of distributor. Materials firstly strike the free falling down materials. Then, materials strike the materials-liner in the vortex or the impact liner and are rebounded to the top of crushing cavity and then fall down. The falling materials with materials shot from the impeller form a continuous curtain of materials. At last, crushed materials will be discharged from the discharging opening.
1. After improved design, rotor with deep chamber increases 30% capacity of materials throughput.
2. Side plate direction can be changed to increase material utility ratio, operating ratio can be increased 48%.
3. Worn hammer with combined type is only changed to reduce operating cost 30%. Another pair of vice hammer is added to prevent from damaging main hammer and side plate.
4. The most key wear resistant material uses wear resistant and high temperature resistant material in American important area.
5. Rhombus shape impact plate is used to prevent side plate from being damaged.
6. Bearing is famous international brand imported from Japan, Sweden, etc.
7. Perfect discharge and smooth curve reduce resisting force when material flows, so capacity is increased greatly.
8. Spread dish with double purposes can make two feeding ways change easily.
9. Special seal structure under main shaft guarantee no oil leak without seal.
10. Japanese hydraulic opening cover device is originally imported. The cover is moved easily and inspection of inner part is easy.
11. Motor with high grade of protection is selected. The motor has features of high efficiency, low noise, etc. The motor complies with IEC, insulation grade F, protection grade IP54/55.
|Throughput capacity (t/h)||Center and Ring feeding||150-280||240-380||350-540||500-640|
|Max. Feed Size (mm)||Soft material||<35||<40||<45||<50|
|Rotation speed (r/min)||1700-1900||1500-1700||1300-1510||1100-1310|
|Power of double motor (KW)||110-150||180-220||260-320||400-440|
|Overall dimension L×W×H (mm)||4100×2330×2300||4140×2500×2700||4560×2600×2900||5100×2790×3320|
|Power source||380V, 50Hz|
|Thin oil lubrication station||Power for double oil pump||2×0.5KW|
|Safety||To make sure the supply of oil with double oil pump, working without oil, temperature when water cools, start the motor by heating it in winter.|
|Power for oil box heater||2KW|
|Overall dimension L×W×H (mm)||820×520×1270
Note: This specification is just referencing, any changes are subject to the products.